* Product Images are shown for illustrative purposes only and may differ from actual product.

SE100 (M10N GPS)

Radiolink M10 GPS/Compass Module SE100
brand:Radiolink
category:GPS Modules
Consult Now You can also add it to your inquiry basket for bulk inquiries.
Inquiry basket
SE100 (M10N GPS)
Radiolink M10 GPS/Compass Module SE100
brand:Radiolink
category:GPS Modules
*Required field
Description

The Radiolink SE100 M10 GPS Module for the Radiolink PixHawk autopilots that will exceed the limitation of IC sensitivity index from circuit schematic design to PCB placement.

  • High Positioning Accuracy: Up to 50 centimeters with quad-mode/250 centimeters with Single Mode.

  • De-interference and Anti-interference: Two-stage filtering with 78db attenuation effectively filters out-of-band interference.In-band input 1dB compression point -3dBm high linear LNA can minimize the impact of even a small amount of interference signals that pass the filter. Effectively resist strong signal interference, such as high-power image transmission on drones, high-voltage lines, etc.

  • Excellent Performance: Positioning 20 satellites in 6 seconds at open ground. Super positioning capability even at the valley bottom. Triple-frequency: 1561±1MHz, 1575±1MHz, 1602~1610MHz. BD1, GPS/L1, Galileo/E1, GLONASS/G1, and quad satellite system operation at the same time are available.

  • Top Configuration: GPS decoder chip: Radiolink SE100, with Ublox M10050, is much better than a single GNSS 7N. Built-in high-precision electronic compass IST8310(I2C port). Antenna: 2.5dbI high gain and selectivity ceramic chip antennas. Power amplify IC: High-gain MMIC chip. Double Filter: two-stage SAWF (Surface acoustic wave filter) from Murata.

  • Compatible with Pixhawk Flight Controller

Use with: Radiolink Pixhawk


Specification
Positional Accuracy Up to 50 centimeters with quad-mode/ 250 centimeters with Single Mode
Protocol Default NMEA. But, when connecting the SE100 to the flight controller, it will recognize the type of flight controller and turn the protocol to the same protocol as the flight controller automatically when connecting the SE100 to the flight controller, when the SE100 disconnects with the flight controller, and the protocol will turn back to the default NMEA.
Velocity Precision 0.1m/s
Max Height 50000m
Max Speed 515m/s
Max Acceleration 4G
Max Update Rate 20Hz
Sensitivity Tracking & Nav.:-167dBm Acquisition:-163dBm Cold start:-151dBm Hot start:-159dBm
Activation Period Cold start: 26s Hot start: 1s
Power Supply Voltage: 5±5%VDC; Current: 50-100mA
Ports GPS: UART port with baud rate 38.4K Geomagnetic: I2C port
Request a Quote
*Required field
Order0
consult
Hong Kong - Office
phone
+852 5801 8252
E-mail
contact@innoshen.com
Shanghai - Office
phone
+86 21 5116 2877
E-mail
contact@innoshen.com
top
  • home
  • 0
    Order
  • consult
  • top