询单篮
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
| GNSS Receiver | Ublox M10 |
| Number of Concurrent GNSS | Up to 4 GNSS:BeiDou/Galileo/GLONASS/GPS/QZSS |
| Compass | IST8310 |
| Output Protocol | UBX (U-blox) , NMEA |
| Accuracy | 2.0m CEP |
| Nav. Update Rate | Up to 25 Hz (single GNSS), Up to 10 Hz (4 concurrent GNSS) |
| GNSS Augmentation System | EGNOS, GAGAN, MSAS and WAAS | QZSS: L1S |
| Default Baud Rate | 115200 |
| Input Voltage | 4.7-5.2V |
| Port Type | JST-GH-10P |
| Antenna | 25 x 25 x 4 mm ceramic patch antenna |
| Power consumption | Less than 200mA @ 5V |
| Operating Temperature | -40~80℃ |
| Dimension | φ50 x14.4 mm |
| Weight | 32g |
Copyright © 2024 INNOSHEN LIMITED. All rights reserved.
cn
en
首页
